Lighting Automation

The lighting automation system allows to obtain great energy saving while assuring the ideal lighting conditions

The lighting automation system is composed of presence, internal and external light sensors and wireless actuators, to be located on the lamps. The presence sensors are useful to determine the real need of the lights use inside a space, while the luxmeters measure the illuminance level, which has to be tuned according to the tasks that have to be conducted into the lighted ambient. Traditional lamps can be switched on/off by the automation devices depending on the real need of lighting in a space, while the LED lamps can be dimmed on the basis of the required illuminance level. The system assures a more efficient use of the energy and a higher visual-lighting comfort level. A great energy saving can be easily achieved both by traditional and new lighting systems, and all the data regarding their use and consumption are available on the Smart Platform.


Basic Function:
  • Remote/automatic control of lighting system (switching on/off)
Connected Functionalities
  • Dimming of the lights depending on the natural light level
  • Turning on/off the lights depending on the real presence of workers and/or natural lighting
  • Full automation of the lighting system (usually in industries the lights are turned on manually)


  • Reduction of “lighting hours” with lower energy consumption even in comparison with standard LED solution
  • Bayesian logics permit to obtain the better energy saving than standard control logics
  • The energy saving is big enough to justify the installation of the smart network in the whole factory that becomes ready even to install other applications
  • The absence of cabling allows to limit the cost of installation
  • Flexible and able to integrate existing lamp with a single system
  • “Certificati Bianchi” incentives (IBS srl of Gruppo Filippetti is an ESCo company)

Smart Device

The system is able to monitor and control internal thermohigrometric conditions limiting energy consumptions, ensuring environmental comfort. Monitoring is related to system emission control (fan coil, split) and to system heating generator control.

Presence PIR

Battery Fed Wireless Communication

Controller 1-10

Electrical Fed Wireless Communication


Battery Fed Wireless Communication

Platform Application

LED Lamps

LED Lamps Replacement

Electrical Fed