Current Meter

Sensor of measurement electrical absorption flux gate. A measuring instrument used to detect currents on parts of a system that cannot be put out of service.

Unlike classical ammeters, that in order to make a measure have to be inserted in a circuit (for this reason it is necessary to temporarily stop the line and then restore it with inserted instrument), the clip-on ammeter can measure currents that are „docked“around the conductor. Detects the electromagnetic field that is formed around the cable. It is used for consumption monitoring.

Connection


Network

Radio 868 Mhz ISM band, GFSK modulation, 115 kbps bit rate, TX out 13 dbm RX -110 sensitivity, dbm. 128-bit AES encryption. Free range 350 m LOS

Setup device

RX system 433 Mhz passive, OOK modulation
Range of connection 10 cm

Technical Features

Power source Lithium primary battery 2 x AA 3.6 V
Consumption 5 µA sleep: receiving setup commands, 35 mA reception of data, 180 mA data
Average lifetime 5 years (10 min monitoring frequency and transmission rate 10 min)
Installation mode Clamp attached to the power cord
Container characteristics Plastic material
Dimensions 58x65x35 mm